А ещё можно попытаться выиграть свою копию 5-го, ответив на 24 вопроса...
Особенно - на 24-й...
Перед регистрацией ознакомьтесь с темой про сертификат безопасности:
DigitalFusion 4.04e
Автор
DenizZ
, 11 11 2004 14:48
14 ответов в этой теме
#1
DenizZ
-
- Модераторы
-
- 3700 Сообщений:
Широкопрофильный гуру по NLE
Отправлено 11 Nov 2004 - 14:48
The current release version of Digital Fusion, DFX+ and DF Render Node is 4.04e. This update was released on November 9th, 2004 and is highly recommended.
А ещё можно попытаться выиграть свою копию 5-го, ответив на 24 вопроса...
Особенно - на 24-й...
А ещё можно попытаться выиграть свою копию 5-го, ответив на 24 вопроса...
Особенно - на 24-й...
#2
Lis
-
- Участники
-
- 86 Сообщений:
Дали нажать на красную кнопку :)
Отправлено 11 Nov 2004 - 16:12
хм, занятна! и не лишено юмора
ну ты, надеюсь, ответил?!
ну ты, надеюсь, ответил?!
#3
DenizZ
-
- Модераторы
-
- 3700 Сообщений:
Широкопрофильный гуру по NLE
Отправлено 11 Nov 2004 - 16:15
Юзеры Велосити могут скачать обновление... Но встанет (как я понимаю) тот апдейт, который позволяет лицензия, присланная Leitch...........
Ждём докторов.
Ждём докторов.
#4
DenizZ
-
- Модераторы
-
- 3700 Сообщений:
Широкопрофильный гуру по NLE
Отправлено 11 Nov 2004 - 16:47
Попросил знакомого - у него лучше чем у меня с доступом... Вот что пишут.
Digital Fusion and DFX+ 4.04e Release Notes
Digital Fusion 4.04e and DFX Plus 4.04e consists primarily of changes made to improve stability and performance of Digital Fusion. The 4.04e release was issued on Nov 9th, 2004.
TOOLS
- The centre position on directional blur is now sub-pixel calculated.
- When transform tools are doing wrap edge sampling, the sampling co-ords are "centered" around the normal 0 to 'image width' sample co-ords. This avoids an obscure issue where sample co-ord limit conditions would be encountered.
- Improved perspective calculations on the particle renderer, and added a Focal Length control.
- Transform tool edge sampling mode change information wasn't being concatenated, causing transformation problems downstream of tools with wrap or duplicate edges.
- Fixed a problem where TransformMatrix parameters generated at a different proxy scale might be used, causing incorrect results.
- Added vector channel support to Custom Tool and Boolean.
- Changing sampling edge mode on a transform tool could lose the tools motion blur settings.
- Was a case where transform tools that should have failed because they could not get their source images would NOT fail. This would generally occur when motion blur was enabled.
- YUV to RGB conversions now support floating point images in the Colour Space tool.
- Internally the 3D Depth Blur tool had a Z scale limit of 1.0, even though the user could enter a value less than that.
- A Colour Curves tool saved in "No Animation" mode would fail to add animation when the mode is changed if it was loaded from a flow, or was pasted into a flow.
- The Text+ tool now supports creation of HD resolution DPTs titles for the Velocity.
NETWORK RENDERING
- Fixed a potential deadlock in the render manager that could sometimes occur when a network/batch flow has finished rendering and is closed.
- Navigating to the 'eyeonline.com' option in the render node taskbar icon's context menu could cause instability.
GENERAL
- Fixed a minor but annoying problem where an interactive render could be aborted when a Loader first renders after loading a flow.
- Fixed a case where a new clip replaces the whole cliplist rather than adding to it.
- Experimental DV support no longer causes occasional crashing on startup.
- Fixed a case where proxy-scaled images could be created 0x0 size, causing crashes.
- Improved speed of motion blur given low memory situations.
- Fixed a problem which could cause concatenated motion blur flattening to give random results.
- Substantially sped up loading a flow in some cases, usually when a tracker would try to request information it didn't need in order to load the flow.
- The tool tile progress updates are now produced for transform tools that are concatenated - the tool that flattens the transformation shows the progress.
- Render Node and DFX+ should now support the "Cache to Disk" path pref when swapping images out to disk in low memory situations. This may have caused some crashes previously in low memory conditions.
- Changed "Cache to disk" path pref to "Disk cache", as although it's used for "Cache to disk", it's also used as a cache for images swapped out to disk in low memory situations. Will be less confusing for users of DFX+ and render node that can't create "Cache to disk" disk caches.
- Disk caches that were already proxied were previously not marked as proxied, which meant they would be proxied again when the disk cache was used by Fusion.
- Motion blur sub-times could be passed upstream if of a tool with blend at 0.0.
- RGB<->YIQ and RGB<->YUV conversion is more accurate for 8 bit images.
- Flattening transforms with motion blur will now abort substantially quicker.
- Fixed a case where some tools could report failure to get a mask even though they had explicitly asked for no mask because blend is 0.
- Fixed a crash when colour picking while in split/wipe mode with different sized images.
- Fixed an occasional crash when closing a flow with groups.
- Fixed a crash that could occur with motion blur given obscure bitmap mask conditions.
- Fixed a crash in tracker that could occur with the preview flipbook after re-tracking to a higher frame number.
- Fixed a crash that can occur when viewing an image with normalise that doesn't need any normalisation, after viewing an image that does.
- Fixed subdivision with negative thickness with a solid mask.
- Fixed channel ordering when doing motion blur of float images with aux channels. This could cause the Blue and red channels to become swapped.
- Occasionally a preview would redisplay its image even though there had been no change.
- The 'Reveal control' inputs are now passive in the Quattrus saver format options so that opening them no longer aborts a render.
- Displaying tooltips containing a large list of output connections could cause a crash. This would be most common with a tool connected to a paint tool with a lot of clone strokes.
- Fixed scaling of image values for 16 bit capable AE plugins.
Как говорится - будем посмотреть.
Digital Fusion and DFX+ 4.04e Release Notes
Digital Fusion 4.04e and DFX Plus 4.04e consists primarily of changes made to improve stability and performance of Digital Fusion. The 4.04e release was issued on Nov 9th, 2004.
TOOLS
- The centre position on directional blur is now sub-pixel calculated.
- When transform tools are doing wrap edge sampling, the sampling co-ords are "centered" around the normal 0 to 'image width' sample co-ords. This avoids an obscure issue where sample co-ord limit conditions would be encountered.
- Improved perspective calculations on the particle renderer, and added a Focal Length control.
- Transform tool edge sampling mode change information wasn't being concatenated, causing transformation problems downstream of tools with wrap or duplicate edges.
- Fixed a problem where TransformMatrix parameters generated at a different proxy scale might be used, causing incorrect results.
- Added vector channel support to Custom Tool and Boolean.
- Changing sampling edge mode on a transform tool could lose the tools motion blur settings.
- Was a case where transform tools that should have failed because they could not get their source images would NOT fail. This would generally occur when motion blur was enabled.
- YUV to RGB conversions now support floating point images in the Colour Space tool.
- Internally the 3D Depth Blur tool had a Z scale limit of 1.0, even though the user could enter a value less than that.
- A Colour Curves tool saved in "No Animation" mode would fail to add animation when the mode is changed if it was loaded from a flow, or was pasted into a flow.
- The Text+ tool now supports creation of HD resolution DPTs titles for the Velocity.
NETWORK RENDERING
- Fixed a potential deadlock in the render manager that could sometimes occur when a network/batch flow has finished rendering and is closed.
- Navigating to the 'eyeonline.com' option in the render node taskbar icon's context menu could cause instability.
GENERAL
- Fixed a minor but annoying problem where an interactive render could be aborted when a Loader first renders after loading a flow.
- Fixed a case where a new clip replaces the whole cliplist rather than adding to it.
- Experimental DV support no longer causes occasional crashing on startup.
- Fixed a case where proxy-scaled images could be created 0x0 size, causing crashes.
- Improved speed of motion blur given low memory situations.
- Fixed a problem which could cause concatenated motion blur flattening to give random results.
- Substantially sped up loading a flow in some cases, usually when a tracker would try to request information it didn't need in order to load the flow.
- The tool tile progress updates are now produced for transform tools that are concatenated - the tool that flattens the transformation shows the progress.
- Render Node and DFX+ should now support the "Cache to Disk" path pref when swapping images out to disk in low memory situations. This may have caused some crashes previously in low memory conditions.
- Changed "Cache to disk" path pref to "Disk cache", as although it's used for "Cache to disk", it's also used as a cache for images swapped out to disk in low memory situations. Will be less confusing for users of DFX+ and render node that can't create "Cache to disk" disk caches.
- Disk caches that were already proxied were previously not marked as proxied, which meant they would be proxied again when the disk cache was used by Fusion.
- Motion blur sub-times could be passed upstream if of a tool with blend at 0.0.
- RGB<->YIQ and RGB<->YUV conversion is more accurate for 8 bit images.
- Flattening transforms with motion blur will now abort substantially quicker.
- Fixed a case where some tools could report failure to get a mask even though they had explicitly asked for no mask because blend is 0.
- Fixed a crash when colour picking while in split/wipe mode with different sized images.
- Fixed an occasional crash when closing a flow with groups.
- Fixed a crash that could occur with motion blur given obscure bitmap mask conditions.
- Fixed a crash in tracker that could occur with the preview flipbook after re-tracking to a higher frame number.
- Fixed a crash that can occur when viewing an image with normalise that doesn't need any normalisation, after viewing an image that does.
- Fixed subdivision with negative thickness with a solid mask.
- Fixed channel ordering when doing motion blur of float images with aux channels. This could cause the Blue and red channels to become swapped.
- Occasionally a preview would redisplay its image even though there had been no change.
- The 'Reveal control' inputs are now passive in the Quattrus saver format options so that opening them no longer aborts a render.
- Displaying tooltips containing a large list of output connections could cause a crash. This would be most common with a tool connected to a paint tool with a lot of clone strokes.
- Fixed scaling of image values for 16 bit capable AE plugins.
Как говорится - будем посмотреть.
#5
Lis
-
- Участники
-
- 86 Сообщений:
Дали нажать на красную кнопку :)
Отправлено 13 Nov 2004 - 14:51
ух ты! скока там оказывается было " a crash ", которые мона было б "Fixed" или " more accurate". !!!
#6
DenizZ
-
- Модераторы
-
- 3700 Сообщений:
Широкопрофильный гуру по NLE
Отправлено 15 Nov 2004 - 10:50
Что-то от Апогея или уже есть, или должно очень скоро появиться (ранняя инфа просочилась ещё в пятницу, 12 ноя...)...
#7
svet
-
- Писатели
-
- 168 Сообщений:
Есть камера, комп, а где поля ?
Отправлено 19 Nov 2004 - 15:13
да, Апогей уже выпустил EYEON_DIGITAL_FUSION_V4.04E_UPDATE-APOGEE, жалко по ссылке недобрался
. Есть еще и от пародокса, но чето им веры нет в последнее время, уж очень коряво ламают.
. Есть еще и от пародокса, но чето им веры нет в последнее время, уж очень коряво ламают.
#8
svet
-
- Писатели
-
- 168 Сообщений:
Есть камера, комп, а где поля ?
Отправлено 27 Nov 2004 - 16:21
может кто нашел?
#9
Praetorian
-
- Писатели
-
- 181 Сообщений:
Фанатик VFX&CG
-
место работы:
Отправлено 21 Mar 2005 - 11:55
Господа... если есть у кого данный апдейт... киньте, плиз, в мыло... praetorian2000[зараза]yandex[тчк]ru
#10
Muhin
-
- Активные Участники
-
- 1793 Сообщений:
не теряя ни секунды
Отправлено 21 Mar 2005 - 14:32
так он 13мег.., может тебе легче из "замены нетбокса" ?
#11
Praetorian
-
- Писатели
-
- 181 Сообщений:
Фанатик VFX&CG
-
место работы:
Отправлено 21 Mar 2005 - 15:09
Не получается у меня на замену нетбокса попасть.
Если честно - мне проще 2-мя частями на мыло.
Если честно - мне проще 2-мя частями на мыло.
#12
Leopard
-
- Участники
-
- 31 Сообщений:
Подержал камеру в руках
Отправлено 22 Mar 2005 - 13:29
Объясните, это как?так он 13мег.., может тебе легче из "замены нетбокса" ?
#13
Praetorian
-
- Писатели
-
- 181 Сообщений:
Фанатик VFX&CG
-
место работы:
Отправлено 22 Mar 2005 - 13:42
Это из общего обменника.
#14
Leopard
-
- Участники
-
- 31 Сообщений:
Подержал камеру в руках
Отправлено 22 Mar 2005 - 18:46
Научи вытаскивать, а я тебе на диске передам!Это из общего обменника.
#15
Praetorian
-
- Писатели
-
- 181 Сообщений:
Фанатик VFX&CG
-
место работы:
Отправлено 23 Mar 2005 - 11:46
Я уже сказал себе. 
А о том, как тянуть из обменника сказано в ФАКе раздела ссылки.
А о том, как тянуть из обменника сказано в ФАКе раздела ссылки.
0 человек читают эту тему
0 пользователей, 0 гостей, 0 скрытых пользователей
